Duramax Antifreeze and Coolant (1 g)

50/50 prediluted. Conventional Green. Low silicate formula. Protection for cars, SUVs and pickup trucks. Ready to use. Liquid armor. 50/50 Prediluted Antifreeze and Coolant: Low silicate formula. Duramax 50/50 Prediluted Low Silicate Formula Antifreeze and Coolant is an easy, ready-to-use formula which meets or exceeds ASTM requirements for use in cars, light duty and heavy duty trucks. This prediluted low silicate product contains demineralized water to prevent hard water deposits and scale build-up that can occur with the use of ordinary tap water. Duramax 50/50 Prediluted Low Silicate Formula Antifreeze and Coolant can be used to top off product in both automotive and heavy duty vehicles. It protects all metals including aluminum and will not harm rubber parts. For heavy duty applications the use of supplemental coolant additives (SCAs) is required. Protection: 50/50 prediluted Antifreeze and Coolant; Freeze Up Protection: less than 34 degrees F; Boil-Over Protection (Using a 15 lb. pressure cap in good condition): less than 265 degrees F; Corrosion Protection: Meets ASTM D3306 and ASTM D4985. www.reladyne.com. Question? Call (888) 830-3156. Manufactured in the USA. RELADYNE,

50/50 prediluted. Conventional Green. Low silicate formula. Protection for cars, SUVs and pickup trucks. Ready to use. Liquid armor. 50/50 Prediluted Antifreeze and Coolant: Low silicate formula. Duramax 50/50 Prediluted Low Silicate Formula Antifreeze and Coolant is an easy, ready-to-use formula which meets or exceeds ASTM requirements for use in cars, light duty and heavy duty trucks. This prediluted low silicate product contains demineralized water to prevent hard water deposits and scale build-up that can occur with the use of ordinary tap water. Duramax 50/50 Prediluted Low Silicate Formula Antifreeze and Coolant can be used to top off product in both automotive and heavy duty vehicles. It protects all metals including aluminum and will not harm rubber parts. For heavy duty applications the use of supplemental coolant additives (SCAs) is required. Protection: 50/50 prediluted Antifreeze and Coolant; Freeze Up Protection: less than 34 degrees F; Boil-Over Protection (Using a 15 lb. pressure cap in good condition): less than 265 degrees F; Corrosion Protection: Meets ASTM D3306 and ASTM D4985. www.reladyne.com. Question? Call (888) 830-3156. Manufactured in the USA. RELADYNE,

Note: 50/50 prediluted products are not recommended for a flush and fill. 1. Fill the cooling system to the proper level with Duramax 50/50 prediluted Antifreeze and Coolant if the system has a recovery reservoir, top off the reservoir to the cold fill line. Do not add water. 2. Periodically check the antifreeze/coolant level and top off with DuraMax 50/50 prediluted antifreeze and coolant. Top Off Directions: Caution: Do not open the cooling system when engine is hot. Refer to the vehicle manufacturer for the recommended change intervals, cooling system capacity, and specific cooling system service instructions. Important Safety Information: Antifreeze/coolant is poisonous. Clean up any leaks or spills immediately. Tighten the child resistant cap and store antifreeze away tram children and animals. Do not store antifreeze in open or unlabeled containers. Wash exposed skin thoroughly with soap and water after use. Drain and Fill Directions: Caution: Do not open the cooling system when engine is hot. Refer to the vehicle manufacturer for the recommended change intervals, cooling system capacity, and specific cooling system service instructions. 1. Drain the cooling system. 2. Fill the cooling system to the proper level with Duramax 50/50 prediluted antifreeze and coolant if the system has a recovery reservoir, top off the reservoir to the cold fill line. Do not add water. 3. Periodically check the antifreeze/coolant level and top off with Duramax 50/50 Prediluted Antifreeze and Coolant. Disposing of Used Antifreeze/Coolant: Dispose of contents and containers in accordance with local and national regulations. Press tab with thumb while unscrewing. Reclose tightly.

Note: 50/50 prediluted products are not recommended for a flush and fill. 1. Fill the cooling system to the proper level with Duramax 50/50 prediluted Antifreeze and Coolant if the system has a recovery reservoir, top off the reservoir to the cold fill line. Do not add water. 2. Periodically check the antifreeze/coolant level and top off with DuraMax 50/50 prediluted antifreeze and coolant. Top Off Directions: Caution: Do not open the cooling system when engine is hot. Refer to the vehicle manufacturer for the recommended change intervals, cooling system capacity, and specific cooling system service instructions. Important Safety Information: Antifreeze/coolant is poisonous. Clean up any leaks or spills immediately. Tighten the child resistant cap and store antifreeze away tram children and animals. Do not store antifreeze in open or unlabeled containers. Wash exposed skin thoroughly with soap and water after use. Drain and Fill Directions: Caution: Do not open the cooling system when engine is hot. Refer to the vehicle manufacturer for the recommended change intervals, cooling system capacity, and specific cooling system service instructions. 1. Drain the cooling system. 2. Fill the cooling system to the proper level with Duramax 50/50 prediluted antifreeze and coolant if the system has a recovery reservoir, top off the reservoir to the cold fill line. Do not add water. 3. Periodically check the antifreeze/coolant level and top off with Duramax 50/50 Prediluted Antifreeze and Coolant. Disposing of Used Antifreeze/Coolant: Dispose of contents and containers in accordance with local and national regulations. Press tab with thumb while unscrewing. Reclose tightly.